Eclipse Batman In Attack Mood Laptop Skin ECLS0051, multicolor


Rs.599
Rs.255
57%
Rs.344 (57%)

In Stock
Fulfilled By Infibeam
Sold by Infibeam Seller
Ships in Same Day
Eclipse Batman In Attack Mood Laptop Skin ECLS0051, multicolor
INR
P-coac-78849536170
In Stock
255.0
Rs.255
Eclipse ECLS0051


Description

An Eclipse Laptop Skins are thin enough not to add any additional bulk to your device but still offer protection from minor surface scratches that your device gets from everyday use. Just because you've now installing skin doesn't mean you can't use any accessories with your Laptop, Our Skins are designed to allow you to use most third party accessories.

Leaves No Residue, Ready to replace your Laptop Skin? No need to worry about Eclipse Skins leaving any residue on your Device when removed.

Dimensions (W x H): 38.60 x 25.90 Centimeter / 259.08 x 386.08 Millimeter
Compatibility: Most Of Laptops Sized 10" to 15.6" Inch Display

Installation Instruction

1. Wipe Off your Laptop Cover with a Smooth fabric, Make sure that no dirts or oil exists on your Laptop because if it does then your Laptop Skin might not stick properly.

2. Check the size of your Laptop Skin, if it is correct then well and good, if not then you always have the option to cut it off with a cutter/scissor, to get perfect fit of the skin on your Laptop cut out the hinge and edges part from the skin.

3. Line up the Laptop Skin on your Laptop, place it straight in the accurate position make sure its not tilted, put a cello tape both the sides (top and bottom) of the Laptop Skin so that it does not move from its possition.

4. Once you are convinced that you have it in correct position, peel off the sticker from one end and affix the initial part of the Skin.

5. Now remove the cello tape from the Laptop Skin which you applied to hold it in correct position, and unpeel the left over sticker on the backside gradually and at the same time smoothly press on the bare skin instead of pressing

Note: It is Recommended that you use any hard surfaced item like your ATM/Credit Card to paste the skin, This will help you to avoid bubbles while applying the skin. If still the bubbles persist under the sticker just peel it backside a little and stick it back on.

Ther you go. You're done! That was an uncomplicated and effortless way to apply your Laptop Skin.

Just check out your Laptop from Front side and feel the difference.

An Eclipse Laptop Skins are thin enough not to add any additional bulk to your device but still offer protection from minor surface scratches that your device gets from everyday use. Just because you've now installing skin doesn't mean you can't use any accessories with your Laptop, Our Skins are designed to allow you to use most third party accessories.Leaves No Residue, Ready to replace your Laptop Skin? No need to worry about Eclipse Skins leaving any residue on your Device when removed.Dimensions (W x H): 38.60 x 25.90 Centimeter / 259.08 x 386.08 MillimeterCompatibility: Most Of Laptops Sized 10" to 15.6" Inch DisplayInstallation Instruction1. Wipe Off your Laptop Cover with a Smooth fabric, Make sure that no dirts or oil exists on your Laptop because if it does then your Laptop Skin might not stick properly.2. Check the size of your Laptop Skin, if it is correct then well and good, if not then you always have the option to cut it off with a cutter/scissor, to get perfect fit of the skin on your Laptop cut out the hinge and edges part from the skin.3. Line up the Laptop Skin on your Laptop, place it straight in the accurate position make sure its not tilted, put a cello tape both the sides (top and bottom) of the Laptop Skin so that it does not move from its possition.4. Once you are convinced that you have it in correct position, peel off the sticker from one end and affix the initial part of the Skin.5. Now remove the cello tape from the Laptop Skin which you applied to hold it in correct position, and unpeel the left over sticker on the backside gradually and at the same time smoothly press on the bare skin instead of pressingNote: It is Recommended that you use any hard surfaced item like your ATM/Credit Card to paste the skin, This will help you to avoid bubbles while applying the skin. If still the bubbles persist under the sticker just peel it backside a little and stick it back on. Ther you go. You're done! That was an uncomplicated and effortless way to apply your Laptop Skin.Just check out your Laptop from Front side and feel the difference.

Features

Warranty

6 Months Warranty

Disclaimer

Product will be delivered for all urban areas serviceable by major courier agencies.For remote / rural areas the product will be sent by local couriers / Indian Speed Post and may take little more time.
No Deliveries on Sunday and National Holidays.

Disclaimer

Shipped by Infibeam.com

The following policies apply for the above product which would be shipped by Infibeam.com
1. Infibeam accept returns if the item shipped is defective or damaged
2. In case of damaged or defective product, the customer is required to raise a concern and ship the product back to us within 15 days from delivery
3. Return shipping costs will be borne by Infibeam.com
4. Infibeam will send a replacement unit as soon as the return package is received
5. Infibeam does not offer any cash refunds
Powered by infibeam